SR - Compensation System

With the unique internal compensation system, these swing clamp cylinders maintain the clamping point with maximum precision over a long operating time.
They can be equipped with clamp arm position control valves to ensure precise workpiece clamping. Further accessories are the VRF flow control valve that controls the swing speed and the metal wiper designed to protect the main wiper.
Larger clamping areas provide either reduced dimensions and lower costs or higher clamping forces.
Rated for operating pressures of up to 500 bar.

Compensation system: High precision device to cancel angular backlash
A
Clamp closing control valve
B
Cylinder speed control
C
Metal wiper
D
Seals
E
Safety overload clutch
F
Clamp arm installation
G
Products table
Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
- Single-acting version
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 1.9
“L” clamping arm length (mm) 40
Rod diameter (mm)16
Piston diameter (mm) 24
Total cylinder stroke (mm) 22
Swinging stroke (mm) 8
Clamping stroke (mm) 14
Piston clamping area (cm2) 2.51
Piston unclamping area (cm2) 4.52
Clamping oil volume (cm3) 5.5
Unclamping oil volume (cm3) 9.9
Effective clamping force / Swing times

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
- Single-acting version
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 1.5
“L” clamping arm length (mm) 40
Rod diameter (mm) 18
Piston diameter (mm) 24
Total cylinder stroke (mm) 22
Swinging stroke (mm) 8
Clamping stroke (mm) 14
Piston clamping area (cm2) 1.98
Piston unclamping area (cm2) 4.52
Clamping oil volume (cm3) 4.4
Unclamping oil volume (cm3) 9.9
Effective clamping force / Swing timesmargin-top-40

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN) 4
“L” clamping arm length (mm) 52
Rod diameter (mm) 22
Piston diameter (mm) 34
Total cylinder stroke (mm) 25
Swinging stroke (mm) 10
Clamping stroke (mm) 15
Piston clamping area (cm2) 5.27
Piston unclamping area (cm2) 9.07
Clamping oil volume (cm3) 13.2
Unclamping oil volume (cm3) 22.6
Effective clamping force / Swing times

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
- Single-acting version
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN) 3.1
“L” clamping arm length (mm) 52
Rod diameter (mm) 25
Piston diameter (mm) 34
Total cylinder stroke (mm) 25
Swinging stroke (mm) 10
Clamping stroke (mm) 15
Piston clamping area (cm2) 4.17
Piston unclamping area (cm2) 9.07
Clamping oil volume (cm3) 10.4
Unclamping oil volume (cm3) 22.6
Effective clamping force / Swing times

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 7.3
“L” clamping arm length (mm) 60
Rod diameter (mm) 28
Piston diameter (mm) 45
Total cylinder stroke (mm) 28
Swinging stroke (mm) 12
Clamping stroke (mm) 16
Piston clamping area (cm2) 9.75
Piston unclamping area (cm2) 15.9
Clamping oil volume (cm3) 27.3
Unclamping oil volume (cm3) 44.5
Effective clamping force / Swing times

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
- Cartridge
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN) 10.5
“L” clamping arm length (mm) 80
Rod diameter (mm) 35
Piston diameter (mm) 55
Total cylinder stroke (mm) 36
Swinging stroke (mm) 15
Clamping stroke (mm) 21
Piston clamping area (cm2) 14.1
Piston unclamping area (cm2) 23.8
Clamping oil volume (cm3) 50.8
Unclamping oil volume (cm3) 85.7
Effective clamping force / Swing times

Cylinder body type:
- Upper flange
- Upper flange with integrated pneumatic valve
- Lower flange
- Lower flange with integrated pneumatic valve
Available versions:
- Metal wiper
- VRF flow control valve (option)
- Clamp arm position control valve
Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 13
“L” clamping arm length (mm) 100
Rod diameter (mm) 45
Piston diameter (mm) 65
Total cylinder stroke (mm) 51
Swinging stroke (mm) 15
Clamping stroke (mm) 36
Piston clamping area (cm2) 17.3
Piston unclamping area (cm2) 33.2
Clamping oil volume (cm3) 88.2
Unclamping oil volume (cm3) 169.3
Effective clamping force / Swing times
