IR - Hydraulic work supports

Hydraulic work supports offer efficient support during machining and compensate vibrations and workpiece deflection as well as rough surfaces.
Wide range of variants with uncompromising performance.
Thanks to the low contact force, work supports can be used as supporting surface for the workpiece or for additional clamp arms and accessories.
They are indispensable when it comes to machining complex profiled workpieces.

Large effective areas supporting high loads with high stability during machining
A
Special wiper in polyurethane (upon request in FKM)
Metal wiper (standard or optional equipment depending on work support type)
B
Venting
C
All models with self-cleaning spiral-shaped groove
D
Copper washer or O-ring depending on work support type
E
All models with hexagon socket
F
Special profile at the sleeve bottom for enhanced cylinder strength and longer service life
G
Products table
Pressurized
Cylinder body type:
- Threaded type M22x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 12
Total cylinder stroke (mm) 4.5
Maximum operating pressure (Bar) 250
Supporting force at 200 Bar (KN) 1.6
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M26x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 16
Total cylinder stroke (mm) 6.5
Maximum operating pressure (Bar) 350
Supporting force at 200 Bar (KN) 2
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 16
Total cylinder stroke (mm) 9.7
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 16
Total cylinder stroke (mm) 8
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 3
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M42x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 25
Total cylinder stroke (mm) 8
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 5.9
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M42x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 25
Total cylinder stroke (mm) 13
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 10.5
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type(M50x1.5), Cartridge, Upper flange
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
- Metal wiper (option)
Rod diameter (mm) 32
Total cylinder stroke (mm) 12
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 13.5
Force / Pressure / Deflection diagram

Cylinder body type:
- Lower flange
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 40
Total cylinder stroke (mm) 18
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 14.5
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 16
Total cylinder stroke (mm) 10
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8
Force / Pressure / Deflection diagram

Double-Acting
Cylinder body type:
- Threaded type M26x1.5
Available versions:
- Version with hydraulic approach
Rod diameter (mm) 16
Total cylinder stroke (mm) 6.5
Maximum operating pressure (Bar) 350
Supporting force at 200 Bar (KN) 2
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
Rod diameter (mm) 16
Total cylinder stroke (mm) 8/15
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8/3
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
Rod diameter (mm) 16
Total cylinder stroke (mm) 8/15
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8/3
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M42x1.5
Available versions:
- Version with hydraulic approach
Rod diameter (mm) 25
Total cylinder stroke (mm) 8/13
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 5.9/10.5
Force / Pressure / Deflection diagram

Low Pressure
Cylinder body type:
- Threaded type M26x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 10
Total cylinder stroke (mm) 6.5
Maximum operating pressure (Bar) 70
Supporting force at 70 Bar (KN) 3KN
Force / Pressure / Deflection diagram

Cylinder body type:
- Threaded type M30x1.5
Available versions:
- Version with hydraulic approach
- Normally extended (spring approach)
Rod diameter (mm) 12
Total cylinder stroke (mm) 8
Maximum operating pressure (Bar) 70
Supporting force at 70 Bar (KN) 4KN
Force / Pressure / Deflection diagram

Tipologia corpo:
- Filettato M36x1.5
Disponibili:
- versione ad accostamento idraulico
- versione normalmente estesa (a molla)
Diametro stelo (mm) 15
Corsa totale cilindro (mm) 8
Pressione max. in lavoro (Bar) 70
Forza di sostegno a 70 bar (KN) 5.5KN
Force / Pressure / Deflection diagram
