SR - 补偿系统

cilindri-rotanti
采用了独特的内部补偿系统,这些转角夹紧油缸即使在长时间工作后扔能保持最高精度的夹紧点
它们可以配备夹紧臂位置气检阀,以确保精确的工件夹紧。额外附件是控制回转速度的VRF流量控制阀和设计用于保护主密封的金属密封。
较大的夹紧作用面积可缩小元件尺寸、降低成本或提高夹紧力。
额定工作压力高达500 bar.
compensation-system-sr

补偿系统:用于消除角度间隙的高精度装置

A

夹紧臂位置气检阀

B

油缸速度控制阀

C

金属密封

D

密封

E

超载安全装置

F

夹紧臂安装

G

产品表

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve
  • Single-acting version

Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 1.9
“L” clamping arm length (mm) 40
Rod diameter (mm)16
Piston diameter (mm) 24
Total cylinder stroke (mm) 22
Swinging stroke (mm) 8
Clamping stroke (mm) 14
Piston clamping area (cm2) 2.51
Piston unclamping area (cm2) 4.52
Clamping oil volume (cm3) 5.5
Unclamping oil volume (cm3) 9.9

Effective clamping force / Swing times

SR16

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve
  • Single-acting version

Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 1.5
“L” clamping arm length (mm) 40
Rod diameter (mm) 18
Piston diameter (mm) 24
Total cylinder stroke (mm) 22
Swinging stroke (mm) 8
Clamping stroke (mm) 14
Piston clamping area (cm2) 1.98
Piston unclamping area (cm2) 4.52
Clamping oil volume (cm3) 4.4
Unclamping oil volume (cm3) 9.9

Effective clamping force / Swing timesmargin-top-40

SR18

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve


Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN)
 4
“L” clamping arm length (mm) 52
Rod diameter (mm) 22
Piston diameter (mm) 34
Total cylinder stroke (mm) 25
Swinging stroke (mm) 10
Clamping stroke (mm) 15
Piston clamping area (cm2) 5.27
Piston unclamping area (cm2) 9.07
Clamping oil volume (cm3) 13.2
Unclamping oil volume (cm3) 22.6

Effective clamping force / Swing times

SR22

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve
  • Single-acting version

Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN)
 3.1
“L” clamping arm length (mm) 52
Rod diameter (mm) 25
Piston diameter (mm) 34
Total cylinder stroke (mm) 25
Swinging stroke (mm) 10
Clamping stroke (mm) 15
Piston clamping area (cm2) 4.17
Piston unclamping area (cm2) 9.07
Clamping oil volume (cm3) 10.4
Unclamping oil volume (cm3) 22.6

Effective clamping force / Swing times

SR25

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve


Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 7.3
“L” clamping arm length (mm) 60
Rod diameter (mm) 28
Piston diameter (mm) 45
Total cylinder stroke (mm) 28
Swinging stroke (mm) 12
Clamping stroke (mm) 16
Piston clamping area (cm2) 9.75
Piston unclamping area (cm2) 15.9
Clamping oil volume (cm3) 27.3
Unclamping oil volume (cm3) 44.5

Effective clamping force / Swing times

SR28

flangiaflangia-con-valvola

piedepiede-con-valvola

cartuccia

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve
  • Cartridge

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve


Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with
“L” length (kN)
 10.5
“L” clamping arm length (mm) 80
Rod diameter (mm) 35
Piston diameter (mm) 55
Total cylinder stroke (mm) 36
Swinging stroke (mm) 15
Clamping stroke (mm) 21
Piston clamping area (cm2) 14.1
Piston unclamping area (cm2) 23.8
Clamping oil volume (cm3) 50.8
Unclamping oil volume (cm3) 85.7

Effective clamping force / Swing times

SR35

flangiaflangia-con-valvola

piedepiede-con-valvola

Cylinder body type:

  • Upper flange
  • Upper flange with integrated pneumatic valve
  • Lower flange
  • Lower flange with integrated pneumatic valve

Available versions:

  • Metal wiper
  • VRF flow control valve (option)
  • Clamp arm position control valve


Maximum operating pressure (bar) 500
Clamping force at 100 bar using the standard “Type 01” clamping arm with “L” length (kN) 13
“L” clamping arm length (mm) 100
Rod diameter (mm) 45
Piston diameter (mm) 65
Total cylinder stroke (mm) 51
Swinging stroke (mm) 15
Clamping stroke (mm) 36
Piston clamping area (cm2) 17.3
Piston unclamping area (cm2) 33.2
Clamping oil volume (cm3) 88.2
Unclamping oil volume (cm3) 169.3

Effective clamping force / Swing times

SR45