IR - 液压工件支撑缸

cilindri-irrigiditori
液压工件支撑在加工过程中提供了有效的支撑,并补偿振动和工件偏转以及粗糙表面。
广泛的可选项与不妥协的性能表现。
由于接触力低,工件支撑可以用作工件支撑面或其他的夹臂和附件。
当涉及到加工复杂异形工件时,它们是不可或缺的。
cilindri-irrigiditori3d

较大的有效作用面积在加工过程中支持高负载和保证高稳定性

A

聚氨酯特殊密封(FKM根据要求)

金属密封(标准或可选,取决于工件支撑类型)

B

排气

C

所有型号带自清洁螺旋形凹槽

D

铜垫圈或O形圈,取决于工件支撑类型

E

所有型号带六角形扳口

F

套筒底部的特殊轮廓,增强了油缸强度并延长了使用寿命

G

产品表

高压

cilindri-filettato

Cylinder body type:

  • Threaded type M22x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 12
Total cylinder stroke (mm)  4.5
Maximum operating pressure (Bar) 250
Supporting force at 200 Bar (KN) 1.6

Force / Pressure / Deflection diagram

IR12_250

cilindri-filettato

Cylinder body type:

  • Threaded type M26x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 16
Total cylinder stroke (mm)  6.5
Maximum operating pressure (Bar) 350
Supporting force at 200 Bar (KN) 2

Force / Pressure / Deflection diagram

IR16S

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 16
Total cylinder stroke (mm)  
9.7
Maximum operating pressure (Bar)
 500
Supporting force at 200 Bar (KN)
1.8

Force / Pressure / Deflection diagram

IR16_2

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 16
Total cylinder stroke (mm)  8
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN)  3

Force / Pressure / Deflection diagram

IR16_0

cilindri-filettato

Cylinder body type:

  • Threaded type M42x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 25
Total cylinder stroke (mm)  8
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 5.9

Force / Pressure / Deflection diagram

IR25_0

cilindri-filettato

Cylinder body type:

  • Threaded type M42x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 25
Total cylinder stroke (mm)  13
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 10.5

Force / Pressure / Deflection diagram

IR25_1

cilindri-filettatocilindri-cartuccia

flangia1

Cylinder body type:

  • Threaded type(M50x1.5), Cartridge, Upper flange

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)
  • Metal wiper (option)

Rod diameter (mm) 32
Total cylinder stroke (mm)  12
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 13.5

Force / Pressure / Deflection diagram

IR32

cilindri-piede

Cylinder body type:

  • Lower flange

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 40
Total cylinder stroke (mm)  18
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 14.5

Force / Pressure / Deflection diagram

IR40

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 16
Total cylinder stroke (mm)
  10
Maximum operating pressure (Bar)
500
Supporting force at 200 Bar (KN)
1.8

Force / Pressure / Deflection diagram

IR16_2

双作用

cilindri-filettato

Cylinder body type:

  • Threaded type M26x1.5

Available versions:

  • Version with hydraulic approach

Rod diameter (mm) 16
Total cylinder stroke (mm)  6.5
Maximum operating pressure (Bar) 350
Supporting force at 200 Bar (KN) 2

Force / Pressure / Deflection diagram

IRFP-16SD

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach

Rod diameter (mm) 16
Total cylinder stroke (mm)  8/15
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8/3

Force / Pressure / Deflection diagram

IR16.D-LD

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach

Rod diameter (mm) 16
Total cylinder stroke (mm)  8/15
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 1.8/3

Force / Pressure / Deflection diagram

grafico16-15d-ld

cilindri-filettato

Cylinder body type:

  • Threaded type M42x1.5

Available versions:

  • Version with hydraulic approach

Rod diameter (mm) 25
Total cylinder stroke (mm)  8/13
Maximum operating pressure (Bar) 500
Supporting force at 200 Bar (KN) 5.9/10.5

Force / Pressure / Deflection diagram

IR25D

低压

cilindri-filettato

Cylinder body type:

  • Threaded type M26x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 10
Total cylinder stroke (mm)  6.5
Maximum operating pressure (Bar) 70
Supporting force at 70 Bar (KN) 3KN

Force / Pressure / Deflection diagram

IR10_70

cilindri-filettato

Cylinder body type:

  • Threaded type M30x1.5

Available versions:

  • Version with hydraulic approach
  • Normally extended (spring approach)

Rod diameter (mm) 12
Total cylinder stroke (mm)  8
Maximum operating pressure (Bar) 70
Supporting force at 70 Bar (KN) 4KN

Force / Pressure / Deflection diagram

IR12_70

cilindri-filettato

Tipologia corpo:

  • Filettato M36x1.5

Disponibili:

  • versione ad accostamento idraulico
  • versione normalmente estesa (a molla)

 

Diametro stelo (mm) 15
Corsa totale cilindro (mm) 8
Pressione max. in lavoro (Bar) 70
Forza di sostegno a 70 bar (KN) 5.5KN

Force / Pressure / Deflection diagram

IR15_70