CT – 推拉缸

cilindri-traenti-e-prementi_new copia
具有高夹紧能力的双作用缸。
可提供导向或自由移动的活塞杆,部分或全部内置阀体,并采用块式。
额定工作压力高达500 bar。
cilindri-traenti-3d

金属密封(根据要求)

A

速度控制阀(根据要求)

B

补偿导向系统,高度精确和坚固

C

CT系列的直线推拉缸配有间隙补偿活塞导向系统,旨在减少磨损。因此它们特别适用于较长的运行时间。

在将夹紧臂或附件安装到这种油缸时,必须固定活塞杆,以免将补偿导向系统暴露于不受控制的力,因为这会导致损坏或设备故障。

产品表

flangia-traentipiede-traenti

cartuccia-traenti

Cylinder body type:

  • Upper flange
  • Lower flange (upon request)
  • Cartridge

Disponibile:

  • Possibilità raschiatore metallico (solo optional)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 22.1
Maximum pulling force (Kn) at 500 bar 12.3
Rod diameter (mm) 16
Piston diameter (mm) 24
Total cylinder stroke (mm) 22
Piston area/pushing (cm²) 4.52
Piston area/pulling (cm²) 2.51
Oil volume/pushing (cm³) 9.9
Oil volume/pulling (cm³) 5.5

flangia-traentipiede-traenti

cartuccia-traenti

Cylinder body type:

  • Upper flange
  • Lower flange (upon request)
  • Cartridge

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 44.4
Maximum pulling force (Kn) at 500 bar 25.8
Rod diameter (mm) 22
Piston diameter (mm) 34
Total cylinder stroke (mm) 25
Piston area/pushing (cm²) 9.07
Piston area/pulling (cm²) 5.27
Oil volume/pushing (cm³) 22.6
Oil volume/pulling (cm³) 13.2

flangia-traentipiede-traenti

cartuccia-traenti

Cylinder body type:

  • Upper flange
  • Lower flange (upon request)
  • Cartridge

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 77.9
Maximum pulling force (Kn) at 500 bar 47.4
Rod diameter (mm) 28
Piston diameter (mm) 45
Total cylinder stroke (mm) 28
Piston area/pushing (cm²) 15.9
Piston area/pulling (cm²) 9.75
Oil volume/pushing (cm³) 44.5
Oil volume/pulling (cm³) 27.3

flangia-traentipiede-traenti

cartuccia-traenti

Cylinder body type:

  • Upper flange
  • Lower flange (upon request)
  • Cartridge

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 116.5
Maximum pulling force (Kn) at 500 bar 69
Rod diameter (mm) 35
Piston diameter (mm) 55
CTotal cylinder stroke (mm) 36
Piston area/pushing (cm2) 23.8
Piston area/pulling (cm2) 14.1
Oil volume/pushing (cm3) 85.7
Oil volume/pulling (cm3) 50.8

BS - Linear block cylinders

cilindri-lineari-a-basetta
In the standard version, linear BS block cylinders of HYDROBLOCK are not equipped with a piston rod guide system. For this reason, no particular measures are required when mounting accessories to this cylinder type. We recommend, however, fixing the piston rod when screwing in the mounting screw.
NOTE: In addition, a stop should be provided on the mounting support behind the cylinder in order to prevent resulting shear forces from acting exclusively on the mounting screws.

产品表

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 98.6
Maximum pulling force (Kn) at 500 bar 59.8
Rod diameter (mm) 10
Piston diameter (mm) 16
Total cylinder stroke (mm) 16
Piston area/pushing (cm2) 2.01
Piston area/pulling (cm2) 1.22
Oil volume/ pushing (cm3) 3.2
Oil volume /pulling (cm3) 2

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 15.3
Maximum pulling force (Kn) at 500 bar 9.8
Rod diameter (mm) 12
Piston diameter (mm) 20
Total cylinder stroke (mm) 16
Piston area/pushing (cm2) 3.14
Piston area/pulling (cm2) 2.01
Oil volume/ pushing (cm3) 5
Oil volume /pulling (cm3) 3.2

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 24
Maximum pulling force (Kn) at 500 bar 14.2
Rod diameter (mm) 16
Piston diameter (mm) 25
Total cylinder stroke (mm) 20
Piston area/pushing (cm2) 4.91
Piston area/pulling (cm2) 2.9
Oil volume/ pushing (cm3) 9.8
Oil volume /pulling (cm3) 5.8

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar)
Maximum pushing force (Kn) at 500 bar 39.4
Maximum pulling force (Kn) at 500 bar 24
Rod diameter (mm) 20
Piston diameter (mm) 32
Total cylinder stroke (mm) 25 / 50
Piston area/pushing (cm2) 8.04
Piston area/pulling (cm2) 4.9
Oil volume/ pushing (cm3) 20.1 / 40.2
Oil volume /pulling (cm3) 12.3 / 24.5

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 61.5
Maximum pulling force (Kn) at 500 bar 37.5
Rod diameter (mm) 25
Piston diameter (mm) 40
Total cylinder stroke (mm) 50
Piston area/pushing (cm2) 12.57
Piston area/pulling (cm2) 7.66
Oil volume/ pushing (cm3) 62.9
Oil volume /pulling (cm3) 38.3

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 96.2
Maximum pulling force (Kn) at 500 bar 56.8
Rod diameter (mm) 32
Piston diameter (mm) 50
Total cylinder stroke (mm) 50
Piston area/pushing (cm2) 19.63
Piston area/pulling (cm2) 11.6
Oil volume/ pushing (cm3) 98.2
Oil volume /pulling (cm3) 58

Available versions:

  • Metal wiper (option)

Maximum operating pressure (Bar) 500
Maximum pushing force (Kn) at 500 bar 162.5
Maximum pulling force (Kn) at 500 bar 112.7
Rod diameter (mm) 36
Piston diameter (mm) 65
Total cylinder stroke (mm) 25
Piston area/pushing (cm2) 33.18
Piston area/pulling (cm2) 23
Oil volume/ pushing (cm3) 83
Oil volume /pulling (cm3) 57.5